Ford 4WD F-250 | F-350 2000-2004 FORD SUPERDUTY F250/350 / EXCURSION 4wd - 8" LIFT KIT

Ford

You've Selected: 4WD : F-250 | F-350

2000-2004 FORD SUPERDUTY F250/350 / EXCURSION 4wd - 8" LIFT KIT

OUR CST 2000-04 SUPERDUTY 8" SUSPENSION LIFT KIT INCLUDES FRONT AND REAR CST PROGRESSIVE STACK SOFT RIDE LEAF SPRINGS, PANHARD BAR AND PITMAN ARM DROP MOUNTS, FRONT SWAY BAR LINKS, FRONT AND REAR U-BOLTS. SHOCKS ARE REQUIRED FRONT AND REAR AND WE OFFER A SINGLE OR DUAL SHOCK SET UP DEPENDING ON WHAT YOU ARE LOOKING FOR. EXCURSION MODELS WILL REQUIRE A SEPERATE 1" LIFT BLOCK AND U-BOLT KIT FOR THE REAR AND IS AVAILABLE.

Kit Features

SOFT RIDE CST PROGRESSIVE STACK LEAF SPRINGS
ALL PARTS COVERED IN A HIGH QUALITY GLOSS BLACK POWDER COAT FINISH
ABILITY TO BE PUT BACK TO STOCK
DESIGNED TO FIT 37" TIRES ON UP TO 10" WIDE WHEELS (38" TIRES MAY BE USED BUT WILL REQUIRE TRIMMING)

Notes

LARGER DIAMETER TIRE AND WHEEL COMBINATIONS MAY BE USED, BUT WILL REQUIRE PRE-FITMENT AND POSSIBLE TRIMMING.
THE FACTORY FRONT DRIVE SHAFT WILL NEED TO BE LENGTHENED 1.5" OVER STOCK.
VEHICLES WITH A 2 PIECE DRIVE SHAFT WILL NEED THE CARRIER BEARING ADJUSTED TO REDUCE DRIVELINE VIBRATION (CST OFFERS A KIT FOR THIS SEE PART NUMBER CSS-F28-2)
VEHICLES WITH A ONE PIECE DRIVE SHAFTWILL NEED A 1.5 DEGREE SHIM INSTALLED UNDER THE REAR LEAF SPRINGS TO PUSH THE PINION ANGLE UP. THIS SHOULD REDUCE ANY REAR DRIVE LINE VIBRATION IF PRESENT.
IN SOME CASES THE REAR DRIVE SHAFT MAY NEED TO BE LENGTHENED IF 8" SPRINGS ARE USED, CHECK THE SLIDE YOKE WHEN THE LIFT IS COMPLETE AND SITTING ON THE GROUND.

Individual Kit Components (Please call for price or to purchase)

Each part number listed below sold separately